PP 3 Piece Flange End Ball Valve

TECHNICAL DATA

CONSTRUCTION :

3 piece design, Single piece stem (Spindle) PTFE seated, full bore.

SIZE RANGE :

15mm to 100mm

END CONNECTIONS :

Flanged as per ANSI B 16.5 (150 #) & as per BS 10 (Table D/E/F) & DIN STD

AVAILABLE M.O.C.:

PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE)

No Description Material Qty.
1 Body Polypropylene 1
2 Ball P.P.R. 1
3 Flange End Polypropylene 2
4 Seat Ring PTFE 2
5 Stem P.P. Reinforced with M.S. 1
6 Seal Ring PTFE 1
7 Stud & Nut M.S. Zinc plated / S.S. 304 / S.S.316 Req.
8 Body Seal Ring Neoprene / PTFE 2
9 Stem “0” Ring Neoprene / Viton 1
10 Handle P.P. Reinforced with M.S. 1
11 Handle Hex Pin S.S. 304 1

Important Parameters of Valves

Valve Size
IN. MM
Flange
Diameter (D)
D1 Length (L)
Face to Face
T Height
Centre (H)
1 / 2″ 95 13.5 128 15 71
3/4″ 100 19.0 148 17 77
1″ 120 25.0 155 19 90
1.1/2″ 140 38.0 180 19 110
2″ 165 50.0 205 21 117.5
2.1/2″ 185 63.5 235 26 147
3″ 200 75.0 250 26 162
4″ 230 100.0 300 27 185

(All Dimensions are in mm)

Features of Three Piece Flange End Ball Valve

  • Available in Flange Type & in screw end from 15 mm to 100 mm.
  • Manufactured from Polypropylene, a Chemically inert thermoplastic.
  • Can be used upto 90°C Temp.
  • Full bore design resulting lower friction loss.
  • Hydraulically and Pneumatically tested for 15 Kg up to 4″.
  • Protective and Resistive from most of the corrosive Chemicals.
  • Carbon black and UV stabilizers resist ultraviolet rays and prevent degradation of PP in sun light exposure.
  • Approved and used by many known Drip Irrigation manufacturers.